Omron K8AK-VS Voltage Monitoring Relay With SPDT Contacts, 24 V ac/dc, 1 Phase
- RS 库存编号:
- 819-3286
- 制造商零件编号:
- K8AK-VS2 24VAC/DC
- 制造商:
- Omron
小计（1 件）*
RMB656.96
(不含税)
RMB742.36
(含税)
有限的库存
- 另外 2 件在 2026年6月01日 发货
**需要更多产品？**输入您需要的数量，点击“查看送货日期”，查看库存和送货信息。
单位 | 每单位 |
|---|---|
| 1 + | RMB656.96 |
* 参考价格
- RS 库存编号:
- 819-3286
- 制造商零件编号:
- K8AK-VS2 24VAC/DC
- 制造商:
- Omron
产品技术参数
产品概述和技术数据表
法例与合规
产品详细信息
通过选择一个或多个属性来查找类似产品。
选择全部 | 属性 | 值 |
|---|---|---|
| 品牌 | Omron | |
| 监测应用 | 电压 | |
| 电源电压 | 24 V 交流/直流 | |
| 触点配置 | 单刀双掷 | |
| 电压灵敏度 | 过压，欠压 | |
| 电气相位 | 1 | |
| 电压感应距离 | 1 → 10 V 交流/直流，15 → 150 V 交流/直流，3 → 30 V 交流/直流 | |
| 延时 | 0.1 → 30 s | |
| 尺寸 | 22.5 x 100 x 95 mm | |
| 最大电压感应 | 10 V ac/dc, 30 V ac/dc, 150 V ac/dc | |
| 长度 | 22.5mm | |
| 系列 | K8AK-VS | |
| 最高工作温度 | +60°C | |
| 最小电压感应 | 1 V 交流/直流，3 V 交流/直流，15 V 交流/直流 | |
| 最低工作温度 | -20°C | |
| 工作温度范围 | -20 → +60 °C | |
| 宽度 | 100mm | |
| 高度 | 95mm | |
| 选择全部 | ||
|---|---|---|
品牌 Omron | ||
监测应用 电压 | ||
电源电压 24 V 交流/直流 | ||
触点配置 单刀双掷 | ||
电压灵敏度 过压，欠压 | ||
电气相位 1 | ||
电压感应距离 1 → 10 V 交流/直流，15 → 150 V 交流/直流，3 → 30 V 交流/直流 | ||
延时 0.1 → 30 s | ||
尺寸 22.5 x 100 x 95 mm | ||
最大电压感应 10 V ac/dc, 30 V ac/dc, 150 V ac/dc | ||
长度 22.5mm | ||
系列 K8AK-VS | ||
最高工作温度 +60°C | ||
最小电压感应 1 V 交流/直流，3 V 交流/直流，15 V 交流/直流 | ||
最低工作温度 -20°C | ||
工作温度范围 -20 → +60 °C | ||
宽度 100mm | ||
高度 95mm | ||
K8AK-VS2 Monitoring Relay.
• Monitors over and under voltages.
• Manual reset and auto resetting supported by 1 relay.
• One SPDT output relay. 5 A at 250 V ac (resistive load)
• Can be normally closed or normally open. NC/NO.
• LED output status indicator.
• Process control signal (0 to 10 V) current splitter input supported.
• Input frequency 40 Hz to 500 Hz
• Inputs isolated from the power supply
• Manual reset and auto resetting supported by 1 relay.
• One SPDT output relay. 5 A at 250 V ac (resistive load)
• Can be normally closed or normally open. NC/NO.
• LED output status indicator.
• Process control signal (0 to 10 V) current splitter input supported.
• Input frequency 40 Hz to 500 Hz
• Inputs isolated from the power supply
K8AK-VS2 24 VAC/DC Model.
• Monitoring Relay.
• Power supply 24 V ac/dc.
• Setting range 1 to 10 V ac/dc, 3 to 30 V ac/dc, 15 to 150 V ac.dc.
• Power supply 24 V ac/dc.
• Setting range 1 to 10 V ac/dc, 3 to 30 V ac/dc, 15 to 150 V ac.dc.
Features and Benefits.
• Power supply (isolated) 24 V ac/dc, 100 to 240 V ac.
• Manual/ Automatic reset (switchable)
• Manual reset – Turn OFF the power supply for minimum of 1 sec.
• Power on lock time 1 s or 5 s (using DIP switch)
• Green LED Power (PWR)
• Yellow LED Relay output (RY)
• Red LED Relay output (ALM)
• One SPDT relay (NO/NC) using DIP switch
• DIN Rail Mounted
• Weight 150 g
• Case material PC and ABS, UL 94 V-0
• Colour N1.5
• Protection IP20
• Manual/ Automatic reset (switchable)
• Manual reset – Turn OFF the power supply for minimum of 1 sec.
• Power on lock time 1 s or 5 s (using DIP switch)
• Green LED Power (PWR)
• Yellow LED Relay output (RY)
• Red LED Relay output (ALM)
• One SPDT relay (NO/NC) using DIP switch
• DIN Rail Mounted
• Weight 150 g
• Case material PC and ABS, UL 94 V-0
• Colour N1.5
• Protection IP20
What is a Monitoring / Measuring Relay?
A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.
Types of Monitoring Relays Available?
• Motor protection relays
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current
标准
UL 60947-5-1, UL 508, IP 20